Description Replacement Neoprene Shock Mounts for Eames Herman Miller LCW DCW Chairs Replacement Shock Mounts for Eames DCW LCW Chairs For pre 1994 chairs! – 100% like original – correct full elastic neoprene rubber material (it is NOT inelastic like polyurethane!) – vulcanized, hence proper metal-rubber connection to correct metal inlay – full elasticity, takes off tension from plywood, offers more comfortable seating – correct dimensions DCW = Dining Chair Wood is the higher chair which need the small shock mount LCW = Lounge Chair Wood is the lower chair which need the wide shock mount Underneath Seat = the round shock mount is for both the same For pre 1994 chairs Please select 1. DCW all you need Set > 1 unit = 1 x backrest shock mount 2 screws adhesive Rubber | Plywood (24ml) 1 Mixing Tube Nozzle for convenient uniformly mixed amounts of each component! 2 Piece of sandpaper 120 1 Pair of gloves 1 Mixing stick for mixing the adhesive 2. LCW all you need Set > 1 unit = 1 x backrest shock mount 2 screws adhesive Rubber | Plywood (24ml) 1 Mixing Tube Nozzle for convenient uniformly mixed amounts of each component! 2 Piece of sandpaper 120 1 Pair of gloves 1 Mixing stick for mixing the adhesive 3. DCW shock mount > 1 unit = 1 x backrest shock mount (small) 2 screws 4. LCW shock mount > 1 unit = 1 x backrest shock mount (wide) 2 screws Underneath Seat > 1 unit = 1 x shock mount NO SCREW! You need to reuse the old one. Original thread pitch -28 UNF Repair is the same procedure like Lounge Chair. Please watch videos below. PLEASE NOTE: Our glue ist manufacturer tested with Herman Miller plywood and works fine! But we had some glue issues with Chinese fake chairs, where the glue didn’t stick. The glue manufacturer told us, it may come from acid of plywood. If you have a fake chair please find your own glue. You can try with ours, but we are not responsible if our glue don’t work Disclaimer: Theoretical guidance, we do not take any responsibility for your execution! All you do is at your own responsibility!



